menu

YISIFLOC (WSR) wet strength resin

  1. Home
  2. Pages
  3. YISIFLOC (WSR) wet strength resin

YISIFLOC (WSR) wet strength resin

Uses

Polyamidoamineepichlorohydrin(PAE) based Wet strength Resin

Main features
  • Industry standard high performance resin for generating high levels of permanent wet strength Properties in varies application like tissue, paper and board
  • Higher efficiency and lower AOX than conventional wet strength resins for lower costin use.
Productdata
Chemical constitution Polyamidoamineepichlorohydrin (PAE)
Physical form Yellow to Brown liquid
pH ( 1% solution) 3 ± 1
Specific gravity 1.05 ± 0.05
Active content % 16 ± 1
Storage Stability Stable for 6 months when stored in closed and dry places
Ecology/Toxicology The usual hygiene and safety rules for handling chemicals should be observed in storage, handling and use. The product must not be swallowed. For further information please refer to the relevant SafetyData Sheet

Dissolving / diluting

  • YISIFLOC (WSR 16) is most effect over a stock pH range from 4.0 to 9.0 whereas best performance achieved at neutral conditions around pH 7
  • To achieve higher results by adding diluted product to high consistency thick stock

Required amount

Standard recommendations vary between 2 kgs to 25 kgs / ton, based on requirement of application. Optimum quantity to be assessed by doing pre-trials